Tapestry Embroidery in the Technique of Needle Punching


Tapestry embroidery in the technique of Needle Punching is an interesting and creative craft. You can embroider tapestry of any complexity with this technique. The right choice for the color and texture of the threads and yarn will turn the tapestry into a real artistic masterpiece. You will learn what tools and materials you will need for tapestry embroidery using needles to create the loops. Furthermore, you are going to learn the main principles of tapestry embroidery with this technique.


Materials and tools


You will need a Needle Punch to create ornamental loops on the fabric. Unlike a regular needle, this needle is fixed in its case the needle’s handle, where it moves freely inside. Thread is run through the case of the Needle Punch from the beginning to the end.

The Needle Punch’s length can be regulated with the screws or additional attachments. The size of the created loop depends on the length of the Needle Punch. The size or diameter of a Needle Punch is also very important. The average size of a Needle Punch is 0.1in. This size will be suitable for tapestry embroidery on the fabric with an average thickness. If you want to make tapestry on thicker fabric, such as sacking, take a needle that is 0.12in in size.


A tool to thread the needle

To thread a Needle Punch, you will need a regular long sewing needle or a wire that is 20 in long.

A frame to stretch fabric

To fix the fabric, you will need a frame for embroidery or a stretcher.

Threads and yarn

Materials and tools

To embroider tapestry with the technique of Needle Punching, you can use various yarn and threads. The quality of the threads and yarn should meet the following requirements:

The yarn shouldn’t be in a pile that is too thick.. Too long of a pile clings to the needle and it becomes hard to work with such yarn.

The yarn shouldn’t be too stretchable because the loops will develop in different lengths. This doesn’t look very neat.

The thickness of the yarn should correspond to approximately the size of the Needle Punch. Thin threads can be used if you previously twisted a few threads into one.

The basic fabric

Materials and tools

For tapestry, it’s better to choose the basic fabric rather than the thick rigid material, or thick canvas for embroidery. If the basic fabric is not the part of the composition, it’s better to choose the light tones of the fabric. White, grey, and beige colors of the basic fabric will be less visible through the stitches.

Glue for fabric or one-side adhesive fabric. The glue is needed to fix the back side of the work in order to prevent the loops from unloosening.

A fabric marker

To mark the design on the basic fabric, you will need a fabric marker or pencil.

Tapestry embroidery of the Needle Punching technique, step-by-step instruction

Here you will find the main principles of tapestry embroidery in the Needle Punching technique.

Materials and tools

Step 1. Choose the pattern for tapestry embroidery.

Step 2. Measure off the basic fabric: the tapestry size + 4 in to the length and the width. Cut out the tapestry base and stretch it using the frame for embroidery or a stretcher. The pull should be average. The fabric shouldn’t sag or become overstretched.

Materials and tools

Step 3. Transfer the pattern’s outlines to the basic fabric using a fabric marker or a pencil. Remember that we embroider on the back side of the work. That’s why the picture must be transferred to the fabric as a mirror reflection.

Step 4. Thread the Needle Punch. It’s very easy to do with wire: just put the wire together and pass it through by its 2 ends from the end of the Needle Punch, through the case-handle to the eye of the Needle Punch. Pull the thread into the loop created out of the wire at the back end of the needle, then pull the wire with the thread and guide the thread into the eye of the

Materials and tools

Needle Punch.

Also, instead of wire, you can use a long sewing needle to thread the needle and pull it through the case of the Needle Punch to its eye in order To thread the eye.

Step 5. Make the stitches loops. The tapestry pattern is embroidered from the back side of the fabric! This means that when the work is finished, the face side of the tapestry is the one that was the back side when working on it and where the loops are seen. How do you make a stitch with a loop needle? Prick the fabric with a Needle Punch, then carefully pull the Needle Punch out of the fabric and with a distance of 0.1 in prick the fabric again. The thread must go behind the needle!

When you make stitches, control their quality. Turn the frame and check whether your loops lie closely enough.

Materials and tools

Fill the large areas with one color first, then move on to the details.

Step 6. Fix the stitches with glue from the side where you’ve already made the embroidery. Let the glue dry and your work is ready.

We hope that our step-by-step instruction will help you create a beautiful tapestry. Tapestry embroidery in the technique of Needle Punching will surely become your favorite craft.

Wonderful Needlework!